Unbox Your Sentinel

Inside the box, you’ll find:

• 1x Sentinel Device:

  
• 2x SD Card Cable (to connect with compatible trail cameras - one is a spare)

• 1x Antenna (based on your chosen network between Cell, LoRa, Satellite)

e.g. cell antenna

e.g. LoRa antenna

• A selection of 3D printed SD card shims (only necessary if you're not using a Reconyx camera)

• Within your Sentinel, there should be a microSD card (this is where all data collected and analyzed by the Sentinel will be stored)

You may also have:

• 1x Modem (for Sentinel updates over Wifi)

• 1x Battery charger

• Batteries for your Sentinel.

  • if you have purched them separately, it is important they are 18650 unprotected button tops.

Additional equipment you need:

• A camera trap (see list of compatible camera traps or reach out to [e-mail] if you have doubts). Ideally, camera options have been discussed before you purchase a Sentinel device.

• Camera strap(s)