Sentinel Specification Sheet
Note this product is still in beta and should only be used for research purposes.
Description
Attach to any trail camera with a standard SD card slot.
Run powerful customized on-board AI-models
Get insights out from anywhere with customizable, modular comms (satellite, cellular, LoRa)
Long Battery Life enabled by low-power sleep mode
Technical Specifications
Performance
Customizable Wakeup Periods
Immediate processing
File Count
Set Periods (6 hours, 24 hours, 3 days etc.)
Battery Life
~65-100 processing cycles per battery (i.e. 65 cycles*2 batteries / (24hrs in a day / 6 hour wake cycles) = 32.5 days
Models
TensorFlow Lite Models (ideally compilable for Google TPU)
Known support for
YoloV5 models (including Megadetector v5)
EfficientDet
MobileNet
ResNet
FOMO (Edge Impulse)
Supported Cameras
Any camera with a standard SD card slot (ideally not cellular cameras)
Operating Temperature
UNKNOWN
External Memory
MicroUSB (up to XXX GB)
USB (up to XXX GB)
Power
Sleep: <1mA
On: 600mA-1A
Peak (for microseconds): 3A
Electronics
Google Coral SoM
NXP i.MX 8M SoC (quad Cortex-A53, Cortex-M4F)
8GB eMCC
Google Edge TPU coprocessor 4 TOPS (int8); 2 TOPS per watt
Microchip SAM D21E
Spypoint Cell-Link Cable
512MB 2-way SD Card/USB Cable
Communication
Wi-Fi 2x2 MIMO (802.11b/g/n/ac 2.4/5GHz)
(optional) Swarm M138
(optional) Blues Wireless Notecard with External SIM slot
(optional) RFM95W LoRa Module
Power
(preferred) 2x 18650 Battery Slots
(optional) 5x 18650 Battery Slots
(optional) External Solar Battery Pack (note this would replace all 18650 batteries)
JST Connector
MicroUSB
Last updated